Apparel & Accessories
All items in the Strengthwear collection follow these same care instructions. Machine or hand wash with cold water without softener. Hang dry. Do not iron. Do not dry clean. Wash with similar fabrics and colors.
Leisure Wear Collections
All items in Eleiko’s Leisure wear collection should follow these same care instructions. Machine wash in 40°C. Hang dry or tumble dry with low heat. Do not iron on print or applications. Do not dry clean. Wash with similar fabrics and colors.
NOTICE! Always follow the care label inside the garment.
For more details on the care symbols and instructions, you can visit clevercare.info, you find information and guidelines how to reduce climate impact, and minimize your effort, and money caring for fashion the clever way.
Wraps and Sleeves
Follow these care instructions for knee sleeves, knee wraps, wrist wraps and pulling straps.
Vegetable tanned leather products
Our vegetable leather products (Eleiko WL Premium Belt and Eleiko Pulling Straps) don’t require special treatment, with use the products will continue to soften delivering optimal comfort and long-lasting durability.
Our objective is to make equipment that caters optimally for our users’ needs while lasting as long as possible. As with any product, its lifetime depends on how it is used and treated. This guideline presents recommendations on how to care for your Eleiko products to ensure safe training, high longevity and proper function.
The Eleiko product warranty is contingent on following the Eleiko Product Care Guideline. Warranty may be voided for any product damaged due to negligence or faulty use, alteration or improper maintenance, storage, repair, installation or handling by the user. Please note that normal wear and tear is not covered by the product warranty. Warranty claims on products will be reviewed on a case-by-case basis and we take our commitment to quality seriously.
Any weightlifting bar can be bent or damaged by severe abuse or improper use. Improper use includes, but is not limited to, barbells being dropped while unloaded; dropped on a hard, non-absorbing surfaces or items e.g. asphalt, benches, racks etc. and stored or left loaded on a rack for an extended period.
Bars shall only be dropped when loaded with discs i.e. do not drop an unloaded bar onto the ground.
Bars shall only be dropped on platforms or surfaces designed for its intended use e.g. the Eleiko IWF Weightlifting Platform or the Eleiko IPF Powerlifting Platform. For any weightlifting activity, we recommend a minimum of 30 mm / 1 inch rubber flooring.
Never drop bars on hard surfaces such as concrete or asphalt.
Bars shall be loaded with discs designed for its intended use e.g. weightlifting discs must be used when dropping the bar. Weightlifting discs are designed to absorb the force of the impact, hence protecting the bar from damage.
Bars shall not be stored with weights loaded, especially in a rack or similar device as this could eventually cause the bar to bend.
Prior to use, ensure there are no sharp edges around the lifting area which can come into contact with the bar as this can damage the bar.
Always use collars on each end of the bar to prevent any movement of the discs during the lift.
Don’t allow bars to get wet.
Never use the bar if it shows signs of damage or if the sleeves do not rotate properly as this may cause injury.
Regularly clean the knurling on your Eleiko bar in horizontal position with the brush provided with your bar in order to remove magnesia, dust, and dirt. A steel brush may be used only on the Eleiko IPF Powerlifting Competition Bars which do not have a chromed surface.
Bars shall be used and stored in an indoor climate that is dry, clean and holds room temperate (ca. 18-27°C).
Eleiko Weightlifting and Powerlifting Discs
Discs shall only be dropped on platforms or surfaces designed for its intended use e.g. the Eleiko IWF Weightlifting Platform or the Eleiko IPF Powerlifting Platform. For any weightlifting activity, we recommend a minimum of 30 mm rubber flooring.
Discs shall not be dropped on a hard surface such as concrete or asphalt.
Don’t allow discs to get wet.
Regularly inspect discs and immediately tighten any screws that may come loose with the appropriate tooling.
Consult with Eleiko customer support if there are any uncertainties on how to mount them properly. Never use a disc that has loose screws. Always use collars on each end of the bar to prevent any movement of the discs during the lift.
Discs shall be used and stored in an indoor climate that is dry, clean and holds room temperate (ca. 18-27°C).
If any recommendation is unclear, please contact us at email@example.com for further information.
Please note that these are general guidelines and do not cover every aspect of using, storing and maintaining your equipment. We advise all users to apply common sense and always put safety first.